Base Info
- Model NO.：P30 SERIES
- Production Capacity：5000pieces,Year
Description
Notes: 0.02mm,0.05mm,0.05mm/1/128" are available.VERNIER CALIPER
Features
Material: Stainless Steel and Carbon steel
Used to measure inside,outside,diameter,steps,depth etc.
Plastic box packing
Conforming standard: DIN862 Notes:
Four ways
Conforming standard: DIN862 JIS B 7507 PARALLAX FREE VERNIER CALIPER
Features
Finely graduated for precise measurement.
Stainless steel.
Satin-chrome scale and vernier backgrounds.
Parallax-free.
User's manual
Conforming standard: DIN862
PARALLAX FREE VERNIER CALIPER
Features
Finely graduated for precise measurement.
Stainless steel.
Satin-chrome scale and vernier backgrounds.
Parallax-free.
CARBIDED VERNIER CALIPER
Features
Stainless steel.
Four way measurements
Inside and outside carbide-tipped measuring faces.
HEAVY DUTY VERNIER CALIPER
Features
Finely graduated for precise measurement.
Stainless steel hardened
Satin-chrome scale and vernier backgrounds.
Packed by wooden box
HEAVY DUTY VERNIER CALIPER
Features
Finely graduated for precise measurement.
Stainless steel hardened
Satin-chrome scale and vernier backgrounds.
Packed by wooden box
GEAR TOOTH VERNIER CALIPER
Consists of two adjustable verniers, that reference two dimensions on the gear and provide a measurement.
Verticle scale: Measures the depth of the teeth from the top of the pitch line
Horizontal scale: This is used to measure the Chordal Thickness of the gear tooth
The Caliper can be used without removing the gear from the machine
Features
Stainless steel, satin chrome plated reading surface
Can be used for measuring hobs, form and thread tools
Adjusted independently by screws on the graduated bars
Thickness of a tooth at the pitch line is measured by an adjustable jaw after the addendum is set by the adjustable tongue
Packed in wooden box
COMPASS VERNIER CALIPER
Features
Made of hardened stainless steel
Packed in wooden box
PRECISION VERNIER CALIPER
Features
3 FLUTES AND 5 FLUTES VERNIER CALIPER
Features
STEEL MARKING GAUGE
Features
CENTER DISTANCE VERNIER CALIPER
Features:
Measure center distance of holes and hole edge distance
High quality stainless steel
Reading 0.02mm
Features
Material: Stainless Steel and Carbon steel
Used to measure inside,outside,diameter,steps,depth etc.
Plastic box packing
Conforming standard: DIN862 Notes:
Four ways
Conforming standard: DIN862 JIS B 7507 PARALLAX FREE VERNIER CALIPER
Features
Finely graduated for precise measurement.
Stainless steel.
Satin-chrome scale and vernier backgrounds.
Parallax-free.
User's manual
Conforming standard: DIN862
| Model No. | Range mm | Reading mm |
| P3017-150 | 150mm/6" | 0.02mm/0.001" |
PARALLAX FREE VERNIER CALIPER
Features
Finely graduated for precise measurement.
Stainless steel.
Satin-chrome scale and vernier backgrounds.
Parallax-free.
| Model No. | Range mm | Reading mm |
| P3017-150 | 150mm/6" | 0.02mm/0.001" |
Features
Stainless steel.
Four way measurements
Inside and outside carbide-tipped measuring faces.
| Model No. | Range mm | Reading mm | Accuracy mm | Jaw length mm |
| P3024-150CT | 0-150mm | 0.02mm | ±0.02mm | 40mm |
| P3024-200CT | 0-200mm | 0.02mm | ±0.03mm | 50mm |
| P3024-300CT | 0-300mm | 0.02mm | ±0.04mm |
HEAVY DUTY VERNIER CALIPER
Features
Finely graduated for precise measurement.
Stainless steel hardened
Satin-chrome scale and vernier backgrounds.
Packed by wooden box
| Model No. | Range mm | Reading mm | Jaw length mm |
| P3027-200A | 0-200mm | 0.05mm / 1/128" | 80mm |
| P3027-250A | 0-250mm | 0.05mm / 1/128" | 80mm |
| P3027-300A | 0-300mm | 0.05mm / 1/128" | 90mm |
HEAVY DUTY VERNIER CALIPER
Features
Finely graduated for precise measurement.
Stainless steel hardened
Satin-chrome scale and vernier backgrounds.
Packed by wooden box
| Model No. | Range mm | Reading mm | Jaw length mm |
| P3027-200C | 0-200mm | 0.05mm / 1/128" | 80mm |
| P3027-250C | 0-250mm | 0.05mm / 1/128" | 80mm |
| P3027-300C | 0-300mm | 0.05mm / 1/128" | 90mm |
GEAR TOOTH VERNIER CALIPER
Consists of two adjustable verniers, that reference two dimensions on the gear and provide a measurement.
Verticle scale: Measures the depth of the teeth from the top of the pitch line
Horizontal scale: This is used to measure the Chordal Thickness of the gear tooth
The Caliper can be used without removing the gear from the machine
Features
Stainless steel, satin chrome plated reading surface
Can be used for measuring hobs, form and thread tools
Adjusted independently by screws on the graduated bars
Thickness of a tooth at the pitch line is measured by an adjustable jaw after the addendum is set by the adjustable tongue
Packed in wooden box
| Model No. | Measuring Range | Reading | Accuracy |
| P3062-16 | M1-18mm | 0.02mm | ±0.03mm |
| P3062-26 | M1-26mm | 0.02mm | ±0.03mm |
| P3062-55 | M15-55mm | 0.02mm | ±0.03mm |
COMPASS VERNIER CALIPER
Features
Made of hardened stainless steel
Packed in wooden box
| Model No. | Range mm | Reading mm | Length of jaws |
| P3066-150 | 0-150mm | 0.1mm | 40mm |
| P3066-200 | 0-200mm | 0.1mm | 40mm |
| P3066-250 | 0-250mm | 0.1mm | 40mm |
| P3066-300 | 0-300mm | 0.1mm | 40mm |
Features
| With locking clamp |
| Made of hardened stainless steel |
| Packed in wooden box |
| Model No. | Range mm | Reading mm | Length of bridge |
| P3067-160 | 0-160mm | 0.05mm | 135mm |
| P3067-250 | 0-250mm | 0.05mm | 135mm |
| P3067-300 | 0-300mm | 0.05mm | 160mm |
| P3067-400 | 0-400mm | 0.05mm | 160mm |
| P3067-500 | 0-500mm | 0.05mm | 160mm |
3 FLUTES AND 5 FLUTES VERNIER CALIPER
Features
| Measure diameter of cylinder(such as tqps, remers, end mills) |
| with odd number of flutes |
| Made of hardened stainless steel |
| Packed in leathery pouch |
| Model No. | Range mm | Reading mm |
| P3068-40 | 4-40mm 3 POINTS | 0.05mm/1/1000" |
| P3068-41 | 1-40mm 5 POINTS | 0.05mm/1/1000" |
STEEL MARKING GAUGE
Features
| Made of hardened stainless steel |
| Packed in wooden box |
| Model No. | Range mm | Reading mm |
| P3077-300 | 0-300mm | 0.1mm |
| P3077-500 | 0-500mm | 0.1mm |
| P3077-1000 | 0-1000mm | 0.1mm |
| P3077-2000 | 0-2000mm | 0.1mm |
| P3077-3000 | 0-3000mm | 0.1mm |
CENTER DISTANCE VERNIER CALIPER
Features:
Measure center distance of holes and hole edge distance
High quality stainless steel
Reading 0.02mm
| Model No. | Range mm/in | Accuracy |
| P3033-150 | 20-150mm | ±0.03mm |
| P3033-200 | 20-200mm | ±0.03mm |
| P3033-300 | 20-300mm | ±0.04mm |