• Model NO.：23006
• Measure Method：Manual
• Accuracy：B
• Precision Measuring Device：Not Precision Measuring Device
• Certification：ISO
• Customized：Non-Customized
• Transport Package：Carton
• Specification：1
• Trademark：Kolor Kut
• Origin：USA
• HS Code：90262090
• Production Capacity：5000

Basic Info.

Model NO. 23006 Measure Method Manual Accuracy B Precision Measuring Device Not Precision Measuring Device Certification ISO Customized Non-Customized Transport Package Carton Specification 1 Trademark Kolor Kut Origin USA HS Code 90262090 Production Capacity 5000

Product Description

The test water paste is a yellow color paste mixture. When it meets water, it will turn purple, and the reaction speed is fast. The boundary line after the reaction is clear and lasts for a long time. It is suitable for all petroleum products, sulfuric acid, nitric acid, hydrochloric acid, ammonia, soap, salt and chloride water content measurement.
This product has been certified by the ISSA Purchasing Association and a product testing certificate. It is an ideal chemical reagent for domestic and foreign shipping companies.

The test water used to measure the height of the tank water should meet the following technical requirements:
The test water paste applied to the water tester is immersed in water at 20 ° C, and the discoloration time does not exceed 10 s. The color after discoloration is clear, the dividing line is clear, and it can be consistent with the water surface. The change of indication value caused by the test water gauge staying between oil and water for 5s and staying for 20s test water paste should not exceed 0.5mm, and there is no shedding phenomenon.
This product adopts the latest sealing technology in Switzerland, adding new chemical factors to the reagents, so that the test water paste can be sealed and stored. The use time will be less and the amount will be less, which will save you money and make you more accurate. 

Apply a thin layer of test water to the surface of the cleaned oil tape copper scale or other measuring tape (with a graduated glass stick) and fill the scale. Put the dipstick copper drop slowly into the bottom of the tank, wait for 5 to 20 seconds and then lift the dipstick, you can clearly observe that there are two traces on the adjacent sides of the dipstick. The oil/air interface is on the top and the oil/water boundary is on the bottom. It should be noted that in the gasoline, diesel, kerosene water test water paste will immediately change color, the test in heavy oil requires a little longer time, depending on the different varieties placed waiting time is not the same.
The test ointment is a bright pink paste that turns bright white when it encounters gasoline, diesel, naphtha, kerosene, crude oil, aviation kerosene, and hydrocarbons (hydrocarbons). Test the grease using the same method as the test paste