How to drain the water from the heater: a popular operation guide on the Internet
With the arrival of the winter heating season, heating water has become a hot topic that many families pay attention to. Recent search data on the entire Internet shows that issues related to heating water discharge continue to rise in popularity. This article will provide you with a detailed guide to draining your heater, including operating steps, precautions, and answers to frequently asked questions.
1. Basic principles of heating water discharge
After long-term use of the heating system, air and impurities will accumulate in the pipes, causing the heating effect to decrease. Timely release of water can remove these substances that hinder heat conduction and restore system efficiency.
| Question type | Proportion | Main performance |
|---|---|---|
| The heating is not hot | 45% | The upper half is hot and the lower half is cool |
| Abnormal sound problem | 30% | The sound of water flowing from pipes |
| water leakage | 15% | Water leakage from valve |
| Other questions | 10% | Abnormal pressure, etc. |
2. Operation steps of heating water discharge
1.Preparation: Prepare water containers, towels, wrenches and other tools
2.Close main valve: First close the main water inlet valve of the heating system
3.Choose a water release point: Generally choose the radiator in the bathroom or kitchen
4.Release water slowly: Turn the bleed valve counterclockwise with a wrench
5.Observe water quality: Until clear water flows out
6.Restore system: Close the bleed valve and open the main valve
| steps | Operational points | Common mistakes |
|---|---|---|
| preparation stage | Make sure there are enough containers to catch water | Not enough containers prepared |
| close valve | Turn off the water first and then turn it back on | reverse order |
| Water release process | Control water flow speed | Valve opening too large |
| completion stage | Check for water leaks | Ignore check |
3. Precautions for draining water from the heater
1.Time selection: It is recommended to conduct it during the day to facilitate observation and emergency treatment.
2.water temperature control: To avoid burns, operation should be suspended when the water temperature is too high.
3.pressure monitoring: Pay attention to the system pressure gauge and maintain it between 1-2bar.
4.Repeat operation: If the effect is not good, you can drain the water again after 1-2 days.
4. Frequently Asked Questions
Q: What should I do if the heater still doesn’t heat up after turning on the water?
A: The system may be clogged. It is recommended to contact a professional for pipe flushing.
Q: Can I install the automatic air release valve myself?
A: Yes, but you need to pay attention to choosing a model that matches the system and ensuring tightness during installation.
Q: How often should the heater release water?
A: Generally, 1-2 times per heating season is enough. In areas with poor water quality, the number can be increased appropriately.
| Question type | solution | processing priority |
|---|---|---|
| Not hot after putting water in | Check system pressure/contact a professional | high |
| Continuous water leakage | Replace valve gasket or valve | urgent |
| abnormal pressure | Replenish system water/check expansion tank | in |
5. Professional advice
1. It is recommended that old communities undergo professional system cleaning every 3-5 years.
2. Special equipment is required to drain water from the floor heating system. It is not recommended to do it by yourself.
3. Installing a water quality filter can effectively reduce the frequency of water discharge
Through the above detailed guide to draining the heater, I hope it can help you solve your heating problem. In case of complicated situations, it is recommended to contact professional heating maintenance personnel in time to ensure the safe operation of the system.
check the details
check the details
en
